All prices are incl. VAT

Oil inlet / return hose for BMW M50 / M52

Oil connection for BMW M50 with everything to use.

Oil inlet / outlet Oil Hose for BMW

This is an oil hose for mounting the turbo on the BMW M50 / M52

This comes with the oil hose kit:
(On access)
14 * 1.5 or 12 * 1.5 outlets from oil pressure sensor
100cm. steel reinforced oil hose, 90 degree AN4 bend at turbo
Oil flange gasket and bolts

This comes with the oil hose kit:
(In return)
33cm. steel reinforced oil hose
Oil flange on turbo (51mm.)
Gasket for oil flange by turbo
Bolts for flange
1/2 "- AN10 nipple for return pipe - Holes are made in the block above the bottom vessel

DownMount kit is 120cm. access hose with and others for return.

NOTE - You must use a nipple or flange for the approach - Here you use either Garrett connection, or another nipple for cheap turbochargers - If you are in doubt, you are welcome to write an email to us.

Find out which oil outlet you will need by measuring the oil pressure thread at the original oil pressure sensor.
See assembly instructions on our guide to the M50 / M52

Oil Kit for BMW M50, M52, M54 - Return + Access - M12x1.5
M12x1.5 thread at oil pressure sensor.
Availability: 44 in stock
SKU: M0010
€106.86
Picture of Oil Kit for BMW M50, M52, M54 - Return + Access - M12x1.5
Oil Kit for BMW M50, M52, M54 - Return + Access - M14x1.5
M14x1.5 thread at oil pressure sensor.
Availability: 3 in stock
SKU: 1.00109.04-M0011
€106.86
Picture of Oil Kit for BMW M50, M52, M54 - Return + Access - M14x1.5
DownMount - Oil kit for BMW M50, M52, M54 - Return + access - M12x1.5
Used when turbo is mounted at the rear under manifold. M12x1.5 thread at oil pressure sensor.
Availability: 48 in stock
SKU: M0037
€106.86
Picture of DownMount - Oil kit for BMW M50, M52, M54 - Return + access - M12x1.5