Search
var returnUrl = webHelper.GetRawUrl(Context.Request);
All Categories
    Menu Close

    Cooling

    Cooling - Everything for cooling systems for motorsport

    Below you will find just about everything you need when building a car for motorsport. Cooling the engine fluids, such as engine oil and cooling fluids is one of the most important factors when you have to run an engine, if your engine gets too hot it will damage the engine and shorten its lifespan. The way you cool the car's fluids is by sending them out in a cooler (either for the coolant or engine oil), this cooler should be as large as possible or of a suitable dimension, depending on the type of motorsport you drive. The liquid that comes out of the radiator is cooled by the air that is passed through the radiator fins, for this, it is also important to use a radiator fan of proper quality. Cooling fans in very high quality from eg. SPAL.

    The engine thermostat determines the minimum operating temperature, this is typically around 85-90 degrees. If you want to raise the power on your engine, it can be an advantage to drive with a lower temperature of eg 70-75 degrees. Here you need to find another thermostat that opens before.

    If you choose an oil cooling kit from us, then your sure that the quality on both the oil cooler and the AN fittings are top-notch. If your unable to find a set that meets your needs, we can help make a custom set just for you. We have everything related to fittings and hoses.

    To allow the engine to circulate the water, a water pump is mounted, and this pump is mechanically pulled by a strap that follows the rotations of the engine. When the engine is running at high rotations, the water pump often runs at much faster speeds, then what is optimal. For that reason its an advantage to mount a water pump that runs at optimal speeds independent of the engine rotations. This will also increase the effect of the engine, as it no longer needs to run an inefficient pump.

    For style points use stylish cooling hoses, we offer several colors, and it will add that nice touch to the engine room. If you rebuilding the cooling system, you might need a new expansion tank, these are mounted with a lid and overpressure valve. If you make your own tank, we offer great-looking new cooling lids, with or without pressure valves.

     

    Sort by
    Display per page

    Water temperature sensor fitting - Ø36mm

    1.00160.04-MP-GR06-36MM-BK
    1/8"-27 NPT thread for sensor
    €16,76 incl tax

    Filler neck - AN20

    1.00158.01-HCFN-B
    €43,58 incl tax

    Oil cooler for Automatic Transmission - 13 rows

    1.00315.01-MP-210C094-13
    Total height: 17.2 cm. Width: 25.5 cm. Thickness 2cm.
    €91,34 incl tax

    High pressure radiator cap / Radiator cap 1,65 "

    1.00141.02-31535
    €15,42 incl tax

    High Pressure Radiator Cap / Radiator Cap 1.65 "

    1.00120.05011
    Kølerdæksel/Radiator cap der klarer op til 1.3 bar.
    €6,57 incl tax

    Intercooler piping kit 3" - Blue

    L2H-ICK300
    €150,84 incl tax

    BMW E46 M3 Aluminum cooler - Mishimoto

    PLR-080202-MMRAD-E46-01
    Fits BMW E46 M3 2001-2006
    €669,75 incl tax

    Intercooler - Golf 4

    1.00305.00-MP-ICC035
    Intercooler for Golf 4 1.8T. Very easy assembly and efficient cooling. Up to 280hp.
    €200,46 incl tax €167,61 incl tax

    SPAL 30130074 gasket

    1.00150.06-30130074
    Fits the VA18
    €31,84 incl tax

    Water temperature sensor fitting - Ø42mm

    1.00131.02-MP-GR06-42MM-BK
    1/8"-27 NPT thread for sensor
    €16,76 incl tax

    Oil cooler element - 7 rows AN7 connection - Black

    1.00309.06-MP-OCT07-AN8
    Total height 125mm. Length with bracket: 340mm. Thickness: 50mm.
    €50,28 incl tax €43,58 incl tax

    Intercooler - BMW E90 / E91 / E92 / E93

    PLR-070401-MP-ICK70BK
    Intercooler kit for BMW E90 E91 E92 E93 325D 330D 335D 335I. Very easy assembly and efficient cooling.
    €502,82 incl tax €368,73 incl tax

    Water to air intercooler 3" - Water to air - Round model - 450mm

    MP-BIC004
    This intercooler has 3" studs. The intercooler is round and therefore it fits well in the front if there is not much space.
    €207,16 incl tax €184,37 incl tax

    Hurricane Water Cooler 800x450mm High flow AN20 Universal (Silver)

    PLR-030202 - SL
    80x45x8cm - With extreme flow and cooling
    €383,15 incl tax

    Mocal style - Oil cooler element - 25 rows AN10 connection - Black

    1.00313.02-TH248 25 ROWS
    L/H/W 330/210/51mm. (Height is total) - Element height 180mm.
    €87,15 incl tax

    Oil cooler element - 19 rows AN8 connection - Black

    1.00113.04-MP-OC19BK-AN8
    Height without studs 146mm. Wide 330mm. Thickness: 51mm.
    €83,80 incl tax

    Davies Craig EWP150L - Incl. controller

    1.00127.06-8970
    Davies Craig electric water pump 150L
    €435,77 incl tax

    SPAL 16 "motorsport cooler fan - Suction - 30102049 - 2024 CFM

    1.00152.06021
    Height: 16.5 "(419mm) Width: 16.5 "(419mm) Depth: 3.44 "(87mm)
    €253,91 incl tax €192,75 incl tax

    Oil filter center bolt - 3 / 4-16 UNF - Long 26mm

    1.00207.06021
    Oil filter-bolt
    €3,35 incl tax

    SPAL 16 "motorsport cooler fan - Suction - 30102120 - 1918 CFM

    1.00151.05011
    Height: 16.3" (414mm) Width: 15.75" (400mm) Depth: 3.45" (87,6mm)
    €184,37 incl tax

    AEM H2O Extra Nozzle Kit - 30-3315

    1.00156.04-30-3315
    Water/Methanol Injection Kit, Includes Interchangeable Swirl Generators for 250cc, 500cc, & 1000cc of Flow, T Fitting and Hose
    €100,56 incl tax

    Marco oil Gear pump UP9 / OIL - 8 liters per minute. - 12 volts

    1.00109.01-UP9 OIL
    Can suck up to 1.5 meters under pump - Pressure up to 5 bar.
    €276,55 incl tax

    Mocal style - Oil cooler element - 10 rows AN10 connection - Black

    1.00314.03-TH248 10 ROWS
    L/H/W 330/99/51mm. (Height is total) - Element height 73mm.
    €67,04 incl tax

    Oil cooler sandwich AN10

    1.00112.01-MP-OA08
    €36,87 incl tax

    SPAL 13 "motorsport cooler fan - Push - 30100399 - 1032 CFM

    1.00151.04021
    Height: 14.17 "(360mm) Width: 13.62 "(346mm) Depth: 2.05 "(52mm)
    €138,78 incl tax

    Oil cooler for Automatic Transmission with mounting bracket - 8 rows

    1.00125.02-TOC405
    Total width: 40 cm. Height: 25,7 cm. Thickness 2,2 cm.
    €100,56 incl tax €83,80 incl tax

    Water to Air Intercooler 3.5 "- Water to air - 5046B

    1.00106.02-5046B
    This is a water to air intercooler that is really efficient. Often used for cars where there is little space in the front.
    €184,37 incl tax

    Marco Oil Gear Pump UP3 / OIL - 5.5 liters per minute. - 12 volts

    1.00109.01-UP3
    Can suck up to 1 meter under pump - Pressure up to 2 bar.
    €217,89 incl tax

    Oil cooler element - 19 rows AN8 connection - Silver

    1.00313.04-248H19 (AN8)
    Height 146mm. Wide 330mm. Thickness: 51mm.
    €83,80 incl tax

    SPAL 10 "motorsport cooler fan - Push - 30100374 - 749 CFM

    1.00152.03021
    Height: 11.20 "(284.5mm) Width: 10.59 "(269mm) Depth: 2.05 "(52mm)
    €159,22 incl tax

    Intercooler 2.5 "- Bar and plate

    1.00305.05-MP-ICC015
    Here is an intercooler that can cool up to 300hp. The dimensions of this intercooler are H: 150 L: 680 B: 90 - 300hp
    €140,79 incl tax

    Safety Release Radiator Cap 1,65''

    1.00141.02-31518
    €16,76 incl tax

    Expansion tank 0.4 liter

    1.00142.03-MP-TA16B
    Expansion tank located next to the cooler.
    €46,93 incl tax

    Digital Transmission Temperature Sender Manifold

    1.00131.06-TT
    AN10 (7/8"x14 UNF) for the ports. Sending Unit Thread Size: 1/8 in. NPT
    €35,20 incl tax

    High pressure radiator cap / radiator cap 1,25"

    1.00141.02-31333
    €16,76 incl tax

    Water to Air Intercooler 3½"- Water to air - 650 hp.

    1.00112.00-ICAWA09
    This is a water to air intercooler that is really efficient. Often used for cars where there is little space in the front.
    €225,43 incl tax

    Tee sensor attachment - BARB ø38mm. - ORB 3/4-16

    1.00207.09014
    €24,30 incl tax

    1.8T MAP sensor welding flange - ALU

    1.00206.11042
    €26,68 incl tax

    Tee sensor attachment - BARB ø30mm. - ORB 3/4-16

    1.00207.09012
    €20,95 incl tax

    Audi A4 / VW Passat 1.8T - Silikone trykslanger - Sort - LAGERSALG

    1.00114.00/05-MP-SHK15 BK
    SILICONE TURBO INTERCOOLER PIP HOSE FOR AUDI A4 VW Passat B5 B5.5 1.8T 94-05 (4Pcs)
    €133,41 incl tax €53,63 incl tax

    Nissan S13 R32 Manual - Alu cooler

    PLR-080402-MP-RA005
    Here is a nuclear cooler from a Nissan S13 R32 with manual transmission.
    €187,05 incl tax €150,84 incl tax

    Oil cooler for Automatic Transmission - 24 rows

    PLR-080303-TOC-679
    Total height: 28.3 cm. Width: 25.9 cm. Thickness 2cm.
    €104,75 incl tax

    Universal expansion tank - Black

    1.00318.04-BLACK,CAP2001,1.6l
    Expansion tank that can be mounted in the engine compartment
    €100,56 incl tax

    PMC Oil Filter Cover for Sensor and Oil Cooler - BMW M52 M54 M56

    1.00103.02-APO-M52-C
    PMC Oil Filter Cap of Aluminum
    €209,51 incl tax

    Oil cooler adapter Double outlet - AN10

    1.00141.05-MP-OA03
    Quality oil cooler adapter. AN10 fittings are included for this adapter.
    €43,58 incl tax €33,52 incl tax

    Tee sensor attachment - BARB ø34mm. - ORB 3/4-16

    1.00207.09013
    €22,46 incl tax

    Nissan 89-93 S13 R32 automatic transmission - Alu cooler

    PLR-070302-MP-RA017
    Alu cooler for Nissan 89-93 S13 R32 with automatic transmission.
    €187,05 incl tax

    Oil filter block with thermostat

    1.00106.03-MP-OA012
    Block with thermostat housing in very high quality.
    €70,39 incl tax

    Intercooler kit - Golf GTI 1.8T / Jetta 1.8T

    PLR-080401-Loft-ICK16B - 2.dele
    Intercooler kit for Audi A3 8L, Golf 4, Bora, Seat Leon 1M, Skoda Octavia 1U. 1,8t
    €374,77 incl tax €334,94 incl tax

    Oil cooler element - 10 rows AN10 connection - Black

    1.00310.01-MP-OCT10
    Wide 340mm. Total height 165mm. Thickness 50mm.
    €72,07 incl tax
    Filters Close