Search
var returnUrl = webHelper.GetRawUrl(Context.Request);
All Categories
    Menu Close

    Cooling

    Cooling - Everything for cooling systems for motorsport

    Below you will find just about everything you need when building a car for motorsport. Cooling the engine fluids, such as engine oil and cooling fluids is one of the most important factors when you have to run an engine, if your engine gets too hot it will damage the engine and shorten its lifespan. The way you cool the car's fluids is by sending them out in a cooler (either for the coolant or engine oil), this cooler should be as large as possible or of a suitable dimension, depending on the type of motorsport you drive. The liquid that comes out of the radiator is cooled by the air that is passed through the radiator fins, for this, it is also important to use a radiator fan of proper quality. Cooling fans in very high quality from eg. SPAL.

    The engine thermostat determines the minimum operating temperature, this is typically around 85-90 degrees. If you want to raise the power on your engine, it can be an advantage to drive with a lower temperature of eg 70-75 degrees. Here you need to find another thermostat that opens before.

    If you choose an oil cooling kit from us, then your sure that the quality on both the oil cooler and the AN fittings are top-notch. If your unable to find a set that meets your needs, we can help make a custom set just for you. We have everything related to fittings and hoses.

    To allow the engine to circulate the water, a water pump is mounted, and this pump is mechanically pulled by a strap that follows the rotations of the engine. When the engine is running at high rotations, the water pump often runs at much faster speeds, then what is optimal. For that reason its an advantage to mount a water pump that runs at optimal speeds independent of the engine rotations. This will also increase the effect of the engine, as it no longer needs to run an inefficient pump.

    For style points use stylish cooling hoses, we offer several colors, and it will add that nice touch to the engine room. If you rebuilding the cooling system, you might need a new expansion tank, these are mounted with a lid and overpressure valve. If you make your own tank, we offer great-looking new cooling lids, with or without pressure valves.

     

    Sort by
    Display per page

    24V VA09-BP12/C-54A (280 MM)

    10EO0625 SPL
    €100,56 incl tax

    24V VA09-BP12/C-54S (280 MM)

    10EO0984 SPL
    €82,13 incl tax

    24V VA109-BBL330P/N-109A/SH

    10EO1492 SPL
    €284,93 incl tax

    24V VA10-BP50/C-61S (305 MM)

    10EO0456 SPL
    €125,70 incl tax

    24V VA11-BP7/C-29S (255 MM)

    1.00111.00-VA11-BP7/C-29S
    10EO0793 SPL - SP30102538A
    €80,45 incl tax

    24V VA14-BP7/C-34A (190 MM)

    1.00108.00-VA14-BP7/C-34A
    10EO0817 SPL - SP30100342A
    €83,80 incl tax

    24V VA14-BP7/C-34S (190 MM)

    1.00109.00-VA14-BP7/C-34S
    10EO0867 SPL - SP30100343
    €85,48 incl tax

    24V VA18-BP70/LL-86A (385 MM)

    1.00110.00-VA18-BP70/LL-86A
    10EO0930 SPL - SP30102621B
    €167,61 incl tax

    24V VA18-BP70/LL-86S (385 MM)

    10EO0639 SPL
    €167,61 incl tax

    24V VA18-BP71/LL-86A BT KS (385 MM)

    10EO0650 SPL
    €175,99 incl tax

    24V VA22-BP11/C-50A (167 MM)

    10EO0669 SPL
    €100,56 incl tax

    24V VA22-BP11/C-50S (167 MM)

    1.00108.00-VA22-BP11/C-50S
    10EO0868 SPL - SP30100380
    €100,56 incl tax

    24V VA31-B100-46A (130 MM)

    10EO0721 SPL
    €92,18 incl tax

    24V VA34-BP70/LL-36A

    10EO0962 SPL
    €159,22 incl tax

    SPAL 24V VA03-BP70/LL-37A (280 MM)

    1.00109.00-VA03-BP70/LL-37A
    10EO0812 SPL - SP30102538A
    €167,61 incl tax

    SPAL 24V VA07-BP7/C-31A (225 MM)

    1.00108.00-VA07-BP7/C-31A
    10EO0609 SPL - SÃ…30100344A
    €100,56 incl tax

    24V VA18-BP51/C-41S (385 MM)

    10EO0981 SPL
    €117,32 incl tax

    24V VA01-BP70/LL-36A (305 MM)

    10EO0813 SPL
    €150,84 incl tax

    24V VA01-BP70/LL-36S (305 MM)

    10EO0451 SPL
    €137,44 incl tax

    24V VA02-BP70/LL-52A

    10EO1480 SPL
    €137,44 incl tax

    24V VA11-BP12/C-57S (255 MM)

    10EO0823 SPL
    €108,94 incl tax

    2-INLET 1-OUTLET ALUMINUM INTERCOOLER

    €502,82 incl tax

    2-INLET 1-OUTLET ALUMINUM INTERCOOLER - BIG

    €535,67 incl tax

    89-94 NISSAN 240SX S13 SILVIA automatic transmission - Alu cooler

    PLR-090202-RAD-NIS-002
    Alu cooler for 89-94 NISSAN 240SX S13 SILVIA
    €187,05 incl tax €167,61 incl tax

    AEM container 1 gallon (3.78 liters) - 30-3325

    1.00155.07-30-3325
    Used for water injection. Container size: 20.3 * 10.1 * 7.6cm.
    €141,63 incl tax

    AEM Electronics Water/Methanol Injection Filters

    1.00155.04-30-3003
    €93,19 incl tax

    AEM V2 One Gallon Water/Methanol Injection Kit - Multi Input - AEM 30-3350

    1.00146.04-30-3350
    The AEM Water Injection Kit is a safe and economical way to reduce air inlet temperatures to increase boost pressure for more power. Lower air inlet temperatures allow users to advance timing without having to run higher-octane fuel. This is the most complete kit available on the market straight out of the box- no additional parts required.
    €736,79 incl tax

    Air to Water - Heat Exchanger

    €444,15 incl tax

    Air to Water Intercooler Heat Exchanger

    €469,29 incl tax

    BMW E30 E36 E46 Z3 M40 M42 M43 M44 OIL COOLER REMOTE FILTER ADAPTOR

    MOCAL TOP9
    M22x1.5 threaded ports
    €217,89 incl tax

    BMW E36 - 325/328 / M3 1988-2000 - EXTREME

    L11V-MP-RA056-OR
    Extreme 56mm. core thickness - Alu cooler for BMW 325/328 / M3 with manual transmission.
    €267,50 incl tax

    BMW E36 Aluminum Radiator - Mishimoto X-line

    PLR080302-MMRAD-E36-92X
    Fits BMW E36 from 1992-1999
    €687,18 incl tax

    BMW E36 Aluminum Coolant Expansion Tank - Black anodized

    1.00148.00-MMRT-E36-92EBK
    Direct fit for the 1992-1999 BMW E36
    €250,74 incl tax

    BMW E90 Manual Gear Aluminum Radiator - Mishimoto

    PLR-080201-MMRAD-E90-07
    Fits BMW E90 from 2006-2013
    €602,71 incl tax

    BMW M5 F10 Charge Cooler

    €937,92 incl tax

    BMW N52, N54 & N55 Racer Thermostat - Mishimoto

    1.00165.02-MMTS-E90-07
    Fits BMW N52, N54 & N55
    €83,80 incl tax

    Bremse køle slange med spiral

    Flere varianter
    €32,85 incl tax

    Bypass adapter block kit - M22x1.5

    Bypass adapter block kit enables you to fit a remote oil filter block anywhere in your engine bay.
    €64,70 incl tax

    Davies Craig Digital Water Pump Control

    Digital water pump control. Comes complete with temp sensor, cable harness and hose connection (intended for 35mm hose) with sensor socket. .
    €184,37 incl tax

    Davies Craig EWP130L

    Davies Craig Electric Water Pump with Aluminum Housing-Complete with Cable Kit and Relay and Hose Adapter- Model: 8080 (EWP130) 3-15Volt Flow: 130L / mMax 10A-40to +
    €310,07 incl tax

    Davies Craig EWP130L - Incl. controller

    Davies Craig Electric Water Pump with Aluminum Housing-Complete with Cable Kit and Relay and Hose Adapter- Model: 8080 (EWP130) 3-15Volt Flow: 130L / mMax 10A-40to +
    €410,63 incl tax

    Davies Craig Tempratursensor

    Water temperature sensor Davies craig temperature sensor Thread 1/4 "NPT.
    €46,93 incl tax

    DSG Aluminum Filter Housing - EA888 2.0FSI

    1.00165.02-HS-0CX3
    DSG Cool Flow Aluminum Auto Oil Filter Housing Replaces the failure prone factory plastic housing For VW EA888 2.0T FSI - Factory part # 02E305045
    €53,50 incl tax

    Cover Plate For Sandwich / Adapter

    From €40,09 incl tax

    Expansion tank 0.4 liter - Black

    1.00157.02-GBFK1205
    Expansion tank located next to the cooler.
    €53,50 incl tax

    Expansion tank 2 liters

    Expansion tank located next to the cooler.
    From €83,13 incl tax

    Electric oil cooler kit with gear pump

    M0028
    Efficient oil cooler kit with gear pump from Italy
    €556,45 incl tax
    Filters Close