Search
var returnUrl = webHelper.GetRawUrl(Context.Request);
All Categories
    Menu Close

    Cooling

    Cooling - Everything for cooling systems for motorsport

    Below you will find just about everything you need when building a car for motorsport. Cooling the engine fluids, such as engine oil and cooling fluids is one of the most important factors when you have to run an engine, if your engine gets too hot it will damage the engine and shorten its lifespan. The way you cool the car's fluids is by sending them out in a cooler (either for the coolant or engine oil), this cooler should be as large as possible or of a suitable dimension, depending on the type of motorsport you drive. The liquid that comes out of the radiator is cooled by the air that is passed through the radiator fins, for this, it is also important to use a radiator fan of proper quality. Cooling fans in very high quality from eg. SPAL.

    The engine thermostat determines the minimum operating temperature, this is typically around 85-90 degrees. If you want to raise the power on your engine, it can be an advantage to drive with a lower temperature of eg 70-75 degrees. Here you need to find another thermostat that opens before.

    If you choose an oil cooling kit from us, then your sure that the quality on both the oil cooler and the AN fittings are top-notch. If your unable to find a set that meets your needs, we can help make a custom set just for you. We have everything related to fittings and hoses.

    To allow the engine to circulate the water, a water pump is mounted, and this pump is mechanically pulled by a strap that follows the rotations of the engine. When the engine is running at high rotations, the water pump often runs at much faster speeds, then what is optimal. For that reason its an advantage to mount a water pump that runs at optimal speeds independent of the engine rotations. This will also increase the effect of the engine, as it no longer needs to run an inefficient pump.

    For style points use stylish cooling hoses, we offer several colors, and it will add that nice touch to the engine room. If you rebuilding the cooling system, you might need a new expansion tank, these are mounted with a lid and overpressure valve. If you make your own tank, we offer great-looking new cooling lids, with or without pressure valves.

     

    Sort by
    Display per page

    Preassembled AN10 hose - 0/90 deg.

    1.00108.06011-Black
    1 meter
    €62,86 incl tax €53,64 incl tax

    Electric thermostat controlled relay kit - 85 degrees

    1.00128.05-FMK03
    Relay kit with temperature sensor that started eg cooling fan at 85 degrees.
    €40,09 incl tax

    Cooling fan assembly kit

    1.00151.05-FAN
    Cooling fan assembly kit for our cooler fan.
    €15,09 incl tax

    SPAL 7.5 "motorsport cooler fan - Suction - 30100394A - 437 CFM

    1.00152.05011
    Height: 8.27 "(210mm) Width: 7.95 "(202mm) Depth: 2.05 "(52mm)
    €131,83 incl tax €127,39 incl tax

    Welding flange with lid - 2 "- 50.8mm.

    1.00163.03-CAP51
    Cooler / container welding flange with lid
    €30,17 incl tax

    BMW E36 - 325/328 / M3 1988-2000 - EXTREME - KIT

    L11V-MP-RA056-KIT
    Extreme 56mm. core thickness - Alu cooler for BMW 325/328 / M3 with manual transmission.
    €468,67 incl tax

    Intercooler 3 "Super - Bar and plate

    PLR-060202-IC02
    Here is an intercooler with super folw that can cool up to 500hp. The intercooler requires little space to place in front of the cooler. The dimensions of this intercooler are H: 300 L: 630 B: 76 - 500 hp.
    €217,91 incl tax

    Oil cooler bracket for fan

    1.00150.04-0119
    Bracket for oil cooler for mounting fan
    €54,48 incl tax

    Mocal style - Oil cooler element - 30 rows AN10 connection - Black (230mm)

    1.00312.06-MP-OC30-237MM
    Fits oil cooler-blower fittings -L/H/W 330/260/51mm. (Height is total) - Element height 230mm.
    €133,43 incl tax

    SPAL Fan Mounting Bracket Kit (1 pieces)

    V57-spl30130010
    €4,61 incl tax

    Performance oil cooler kit with powerful fan

    OilcoolerkitFAN
    Very efficient oil cooler kit. Incl. Oil cooler element, Radiator bracket and SPAL fan
    €314,04 incl tax €291,66 incl tax

    Welding flange with lid - 1½ "- 38mm. - Black

    1.00160.04011
    Cooler / container welding flange with lid
    €28,50 incl tax

    Intercooler piping kit 2.5" - Black

    L1H-ICK250BK
    €176,00 incl tax

    Oil cooler element - 13 rows AN10 connection - Black

    1.00305.06-MP-OCT13-AN10
    Wide 340mm. Height 172mm. Thickness 50mm.
    €87,16 incl tax

    NEO Synthetics - Keep cool - (Water Wetter)

    1.00114.03-neo
    This liquid is not greasy.
    €38,72 incl tax

    Oil cooler kit - Choose from several variants

    2stk. 1.00108.06-SLA + 1 stk. Oliekøler + 1 stk. Sandwich
    Quality oil cooler kit that can be used on many different engines.
    €207,85 incl tax

    Oil cooler adapter with thermostat - 3/4-16

    1.00112.06-MP-OA11
    €52,30 incl tax

    Mocal style - Oil cooler element - 16 rows AN10 connection - Black

    1.00113.06-248H16 k
    L/H/W 330/150/51mm. - Element height 125mm.
    €83,81 incl tax

    Universal Oil Cooler Mounting Bracket

    1.00307.02-OCBR
    Used for Mocal oil coolers
    €13,28 incl tax

    24V VA11-BP12/C-29S (255MM)

    1.00131.05-VA11-BP12/C-29S
    10EO0992 SPL - SP30100349A
    €81,30 incl tax

    Universal Dual Pass bar & Plate Oil Cooler - Medium - Sort - AN10

    L3V-MP-OC140-14"
    Dual pass oil cooler medium.
    €108,95 incl tax

    Intercooler piping kit 3" - Black

    L1V-ICK300BK
    €184,38 incl tax

    Marco Oil Gear Pump UP2 / OIL - 3.3 liters per minute. - 12 volts

    1.00114.04-UP2/OIL
    Can suck up to 1 meter under pump - Pressure up to 1.5 bar. H: 126 x L: 112 x W: 76
    €184,38 incl tax

    Water temperature sensor fitting - Ø38mm

    1.00138.04-MP-GR06-38MM-BK
    1/8"-27 NPT thread for sensor
    €16,76 incl tax

    BMW E46 - Alu cooler

    PLR-020103-MP-RA056B
    Alu cooler for BMW E46 with manual transmission.
    From €192,76 incl tax

    Universal Intercooler - Bar and Plate 2.5 "

    1.00301.06-IC06
    The dimensions of this intercooler are 550mm x 230mm x 65mm
    €147,51 incl tax

    SPAL XTREME 12 "motorsport cooler fan - Suction - 30103202 - 1870 CFM - Curved

    1.00137.05-SPAL
    Height: 13.385 "(331mm) Width: 13.385 (331mm) Depth: 3.728 "(112mm)
    €234,67 incl tax

    SPAL 16 "motorsport cooler fan - Push - 30102048 - 1959 CFM

    1.00152.04031
    Height: 16.3 "(414mm) Width: 16.3 "(414mm) Depth: 3.47 "(88mm)
    €184,38 incl tax

    Oil cooler relocation - AN10

    1.00119.04-MP-OA0506
    Quality oil cooler relocation. AN10 fittings are included for this relocation.
    €56,99 incl tax

    Oil adapter for BMW E36 / E46 / E90

    1.00203.12032
    Oil cooler fitting adapter for S54 N54 N55
    €50,29 incl tax €41,91 incl tax

    Davies Craig EWP150L - Kit

    1.00129.02-8060
    Davies Craig electric water pump 150L
    €276,57 incl tax

    SPAL XTREME 12 "motorsport cooler fan - Suction - 30102038 - 1640 CFM

    1.00151.06031
    Height: 13.385 "(339mm) Width: 13.385 (339mm) Depth: 3.728 "(95mm)
    €217,91 incl tax €184,38 incl tax

    Coolant Expansion Tank - Pressure relief valve in the lid

    1.00145.02-GBDR15201
    With AN6 connection
    €167,62 incl tax

    BMW M50, S50 S52 Oil Cooler Adapter

    1.00138.04-APO-M50
    Oil cooler adapter in aluminum. Use Oil filter MANN HU925 / 4x
    €109,79 incl tax

    Universal Dual Pass bar & Plate Oil Cooler - Large - Sort - AN10

    L3V-MP-OC140-18,5"
    Dual pass oil cooler Large.
    €117,33 incl tax

    Tee sensor attachment - BARB ø40mm. - ORB 3/4-16

    1.00207.09015
    €25,98 incl tax

    High pressure radiator cap / Radiator cap 1,65 "

    1.00141.02-31535
    €15,42 incl tax

    High Pressure Radiator Cap / Radiator Cap 1.65 "

    1.00120.05011
    Kølerdæksel/Radiator cap der klarer op til 1.3 bar.
    €6,57 incl tax

    Water temperature sensor fitting - Ø32mm

    1.00119.03-MP-GR06-32MM-BK
    1/8"-27 NPT thread for sensor
    €16,76 incl tax

    Water temperature sensor fitting - Ø40mm

    1.00150.03-MP-GR06-40MM-BK
    1/8"-27 NPT thread for sensor
    €16,76 incl tax

    Radiator welding flange 1,65''

    1.00142.06042
    Køler/Radiator cap svejseflange med mulighed for tilføjelse af ekstra tank.
    €14,75 incl tax

    Expansion tank 0.4 liter

    1.00142.03-MP-TA16B
    Expansion tank located next to the cooler.
    €46,93 incl tax

    Oil cooler sandwich AN10 - Black

    1.00112.01021-MP-OA08 SORT
    €36,88 incl tax

    Intercooler piping kit 2.5" - Blue

    L2V-ICK250
    €184,38 incl tax

    Mocal style - Oil cooler element - 9 rows AN10 connection - Black

    1.00307.05-248H09 K
    L/H/W 330/89/51mm. (Height is total) - Element height 65mm.
    €67,05 incl tax

    Welding flange with lid - 1 "- 25mm.

    1.00163.03-25CAP
    Cooler / container welding flange with lid
    €26,82 incl tax

    SPAL Fan Mounting Bracket Kit (1 Pieces)

    V66-spl30130032
    €5,53 incl tax

    Intercooler - Golf 4

    1.00305.00-MP-ICC035
    Intercooler for Golf 4 1.8T. Very easy assembly and efficient cooling. Up to 280hp.
    €200,47 incl tax €167,62 incl tax

    BMW E46 M3 Aluminum cooler - Mishimoto

    PLR-080202-MMRAD-E46-01
    Fits BMW E46 M3 2001-2006
    €669,81 incl tax

    BMW 5/6 E Series Performance Intercooler Kit

    PLR050403-MP-IC50A
    BMW 525d 530d 535d E60/E61 04-10 635d E63/E64 06-10
    €452,58 incl tax
    Filters Close