AN Union Fitting - Black Aluminum
AN Union fitting for fuel systems. Qualitec offers a wide range of AN fittings for both oil and fuel hoses etc. We typically have them in stock and can ship within 24 hours of ordering.
To connect hoses you can use a Union fitting with male/male, male/female, or female/female. There are plenty of options for how you can design your system, we also have Y and T-pieces, if you need to convert 2 to 1 or 1 to 2.
If you're unable to find the fitting you need or help with assembly feel free to contact us.
AN fitting sizes:
AN-4 fitting uses approx. 6mm hoses.
AN-6 fitting uses approx. 8mm hoses.
AN-8 fitting uses approx. 10mm hoses.
AN-10 fitting uses approx. 14mm hoses.
AN-12 fitting uses approx. 17,5mm hoses.
AN-16 fitting uses approx. 23,8mm hoses.
AN-20 fitting uses approx. 28mm hoses.
AN He - AN He - Collecting Union - Black alu
AN Hun - AN Hun - Collecting Union - Black alu
AN Han - 2xAN Han - Y-Collector Union - Black alu
AN He - 2xAN He - T-Collector Union - Black alu
AN Female with orbit - 2xAN Male - T-Collector Union - Black alu
AN He - AN He Long - Collecting Union Implementation - Black alu
Y-piece - 2 pcs. AN8 - AN10 (7/8 "-14) found
Y-block - 1x -10 ORB -> 2x -8 ORB
Y-block - 1x -8 ORB -> 2x -6 ORB
Y-block - 1x -8 ORB -> 2x -8 ORB
Bulkhead "On the run" - Black
Bulkhead AN Tee
T-piece AN fitting with NPT at the end
T-piece AN fitting with NPT on the side
AN Female T-piece - Black
NPT FEMALE PIPE TEES
NPT-MALE Coupler
Tee AN wrap around with AN studs on the side
NPT Female couplers
Y-block - NPT threaded connection
