Cooling system

The cooling system is a crucial part of the engine’s operation and is responsible for keeping the temperature stable during both normal driving and under load. Without a properly functioning cooling system, the engine risks overheating, which can lead to reduced performance, increased wear, or in the worst case, serious engine damage.

A cooling system typically consists of several key components such as the radiator, water pump, thermostat, hoses, expansion tank and coolant. Together, they ensure that heat is carried away from the engine and released through the radiator. Performance and motorsport cars often place greater demands on cooling, as the engine operates under higher loads and generates more heat than standard.

A correctly sized cooling system is important for both reliability and performance. Excessive temperature can negatively affect engine oil, gaskets and components, while too low a temperature can result in poor combustion and inefficient engine operation. That is why a good cooling system is not only about maximum cooling, but about keeping the engine within its optimal temperature range.

Sort by
Display per page

Intercooler 2.5 "- Bar and plate

1.00305.05-MP-ICC015
Here is an intercooler that can cool up to 300hp. The dimensions of this intercooler are H: 150 L: 680 B: 90 - 300hp
€112,37

Coolant Expansion Tank - Pressure relief valve in the lid

1.00146.07-GBDR15201
With AN6 connection
€133,77

Oil cooler adapter with thermostat

1.00163.00-GBSF00102-10
3/4"-16 UNF / M20x1.5
€93,64

Oil cooler for Automatic Transmission - 4 rows

1.00115.03-TOC-402
Width: 40cm. Height: 13,5cm. Thickness 2cm.
€80,26

24V VA07-BP12/C-58S (225 MM)

1.00306.01-VA07
10EO0454 SPL - SP30100464A - (24v / 696 cfm / Pushing)
€70,95

Water temperature sensor fitting - Ø38mm - 3/8"- NPT

1.00123.03-MP-GR06-38NPT38BK
3/8"- NPT thread for sensor
€16,05

SPAL 7.5 "motorsport cooler fan - Push - 30100393 - 437 CFM

1.00152.03031
Height: 8.27 "(210mm) Width: 7.95 "(202mm) Depth: 2.05 "(52mm)
€107,73

AEM Water injection up to 2.5 bar charge pressure - 30-3300

1.00142.07-30-3300
Kit that can be used for charging pressures up to 2.5 bar.
€534,54
Filters Close