Hard line & accessories
Hard line tubing is used when you want to build a more fixed, precise and professional pipe system in the car. While flexible hoses are often used in parts of the system, hard line is ideal in the areas where you want a more permanent solution with a neat result, good durability and better control over routing. The tubes are mounted completely rigidly once installed, so this requires a fuel hose in the engine bay that can handle vibration. This is often seen in fuel systems, brake systems, clutch systems and other technical installations in road cars, track cars, drift cars and motorsport projects.
Hard line is especially relevant when you are building a new system from scratch, relocating components or want a more refined installation than with ordinary rubber hoses. With the right tubing, fittings, nuts, sleeves, bending tools and other accessories, you can create a solution that is both strong, tight and visually more correct in the engine bay, cabin or trunk. It is also an advantage when space is limited and you need precise routing around the engine, bodywork, tank, master cylinder or other components.
Outer diameter:
1/4" / 6.35 mm
5/16" / 7.93 mm
3/8" / 9.52 mm
1/2" / 12.7 mm
5/8" / 15.87 mm
3/4" / 19.05 mm
AN-6 replacement Hard Line Olive - 3/8" (9,52mm.)
AN-6 replacement Hard Line Olives - 5/16" (7,93mm.)
AN-8 replacement Hard Line Olive - 1/2" (12,7mm.)
AN-10 replacement Hard Line Olive - 5/8" (15,87mm.)
90degrees. AN fitting - Tube To Male Adapter AN-6 -> Hardtube 5/16 "(7.93mm.) Black
Tube straightener
Nuke Performance full flow flex fuel sensor adapter AN10
90degrees. AN fitting - Tube To Male Adapter AN-8 -> Hardtube 3/8 "(9.52mm.) Black
90degrees. AN fitting - Tube To Male Adapter AN-6 -> Hardtube 3/8 "(9.52mm.) Black
- 1
- 2
