Fuel systems

The fuel system is a crucial part of the car’s overall setup when fuel needs to be delivered safely, consistently and in the correct amount to the engine. In tuning, motorsport and conversions, the original fuel system is often not enough, especially if the car is getting more horsepower, a larger turbo, different engine management or is going to be used under heavier load. That is why many choose to upgrade to a fuel system that better matches the car’s power target and the specific project.

At Qualitec, you will find an exciting range of parts for fuel systems for street cars, race cars, drift cars and more serious motorsport projects. A well-functioning fuel system is important because it helps ensure the correct fuel supply to the engine, even when load increases. This provides a better foundation for stable engine operation, more precise tuning and greater safety in a performance setup where lack of fuel can cause major problems.

In this category, you will find fuel pumps, fuel pressure regulators, catch tanks, fuel rails, fuel hoses, AN fittings, filters, adapters and other accessories for building or upgrading fuel systems. Whether you are working with an in-tank or external fuel pump, an EFI setup, motorsport or a custom-built solution, it is important to choose components that match correctly.

An upgraded fuel system is often used when the original solution can no longer keep up. This may be with higher power output, larger injectors, an ethanol or E85 setup, motorsport use or projects where better control of fuel pressure and a more reliable fuel supply are required. With the right components, it becomes easier to build a fuel system that matches both the engine, the application and future upgrades.

It is important to know the target for how much power you want the system to be able to support with stable and sufficient fuel delivery. It is also important to consider whether you will be driving fast through corners, where the fuel can be forced to one side of the fuel tank and cannot be picked up properly. If you are going to use the car for motorsport, we therefore recommend installing a surge tank.

Sort by

Radium Engineering Nissan 6-cylinder injector seats 30 mm

20-0160-06
CNC-machined 30 millimetre black injector seats for Nissan 6-cylinder engines. Used for conversion from side-feed to top-feed and ensure correct installation and sealing of injectors in the intake manifold. Supplied as a set of 6.
€89.65

Radium Engineering Nissan S13 SR20DET top feed fuel rail kit

20-0558
Radium Engineering fuel rail conversion kit for Nissan S13 SR20DET engines. Used to convert from side feed to top feed injectors and allows installation of performance and high-flow injectors.
€224.25

Radium Engineering Nissan S14/S15 SR20DET top feed fuel rail kit

20-0359
Radium Engineering fuel rail conversion kit for Nissan S14/S15 SR20DET engines. Used to convert from side feed to top feed injectors and allows fitment of performance and high-flow injectors.
€287.67

Radium Engineering Subaru EJ parallel fuel rail plumbing kit

20-0984
Radium Engineering Subaru EJ parallel fuel rail plumbing kit for Subaru Impreza STi 2008-2021. Complete kit with multiport regulator, pressure gauge, 3/8" EFI hose, Pushlok hose ends, ORB fittings, adapters and mounting hardware for Radium fuel rails. Suitable for tuning, E85, turbo and motorsport.
€394.04

Siemens Deka injector 875cc (Trick Flow)

1.00203.04044
Siemens Deka 875cc injector produced by Trick Flow for tuning, turbo engines and motorsport. High impedance EV1 injector with calculated output up to approximately 115 horsepower per cylinder on petrol and 99 horsepower per cylinder on E85.
€79.21

Black steel reinforced rubber hose 28.5mm. / AN20

Fuel(Non alcohol), Engine oil, Lube, Coolant and Air lines
€42.82

SPA turbo - Adjustable Petrol Pressure Regulator - BMW mm.

1.00121.02-212
Adjustable Petrol Pressure Regulator suitable for eg BMW.
€77.60

In-tank surge tank

TA303N
€414.24

Tank tape black 50 m x 50 mm

1.00234.08051
Length: 50 meters. Width: 50 millimeters.
€14.72

Tankudluftningskit

377186
€0.00

Toyota 2JZ fuel rail kit

1.00165.05-GBVP00114
Toyota 2JZ fuel rail kit for 14 millimetre injectors. Suitable for upgrading the fuel system with larger injectors, turbo, E85, tuning and motorsport.
€66.90

Turbosmart FPR10 Pro-Lite Black – Fuel Pressure Regulator

1.00112.02-TS-0404-1442
TS-0404-1442
€280.98 €253.68

Walbro 255lph High Pressure Fuel Pump - GSS340

1.00232.11021
This fuel pump delivers up to 255 liters per hour. Can be used by petrol cars. 500hp +
€106.50

Walbro 350lph High Pressure Fuel Pump (11mm Inlet - 180 degrees from Outlet)

1.00202.11014-GSS351G3
Walbro fuel pump with inlet of 11 mm and outlet point the other way. Can deliver up to 350 liters per hour. Used by petrol cars - 600 HP +
€109.72

Walbro 350lph High Pressure Fuel Pump (22,5mm Intlet)

1.00202.11021-GSS350G3
This fuel pump delivers up to 350 liters per hour. It has an inlet of 22,5mm. Used for gasoline - 600 HP +
€109.72

Walbro 400lph 39/50 DC / SS Pump / kit package

1.00158.03-TIA400-2
This fuel pump from Walbro has an installation kit included. Delivers up to 400 liters per hour. Can be used for petrol cars - 500 HP +
€147.18

Walbro FRB-16 Reciprocating Fuel Pump

FRB16-2
€400.86
Filters Close