Fuel systems

The fuel system is a crucial part of the car’s overall setup when fuel needs to be delivered safely, consistently and in the correct amount to the engine. In tuning, motorsport and conversions, the original fuel system is often not enough, especially if the car is getting more horsepower, a larger turbo, different engine management or is going to be used under heavier load. That is why many choose to upgrade to a fuel system that better matches the car’s power target and the specific project.

At Qualitec, you will find an exciting range of parts for fuel systems for street cars, race cars, drift cars and more serious motorsport projects. A well-functioning fuel system is important because it helps ensure the correct fuel supply to the engine, even when load increases. This provides a better foundation for stable engine operation, more precise tuning and greater safety in a performance setup where lack of fuel can cause major problems.

In this category, you will find fuel pumps, fuel pressure regulators, catch tanks, fuel rails, fuel hoses, AN fittings, filters, adapters and other accessories for building or upgrading fuel systems. Whether you are working with an in-tank or external fuel pump, an EFI setup, motorsport or a custom-built solution, it is important to choose components that match correctly.

An upgraded fuel system is often used when the original solution can no longer keep up. This may be with higher power output, larger injectors, an ethanol or E85 setup, motorsport use or projects where better control of fuel pressure and a more reliable fuel supply are required. With the right components, it becomes easier to build a fuel system that matches both the engine, the application and future upgrades.

It is important to know the target for how much power you want the system to be able to support with stable and sufficient fuel delivery. It is also important to consider whether you will be driving fast through corners, where the fuel can be forced to one side of the fuel tank and cannot be picked up properly. If you are going to use the car for motorsport, we therefore recommend installing a surge tank.

Sort by

ALUMINUM UNIVERSAL TANK - 2L

1.00113.07-GBKI01901-02
132x132x150mm - Thread type: AN8 - 3/4"-16
€63.15

ALUMINUM UNIVERSAL TANK - 4L

1.00309.06-TANK 4L
132x132x260mm - Thread type: AN8 - 3/4"-16
€80.28

AN20 PTFE Steel reinforced hose

T1-2-AN20-Silver
E85, Methanol, Fuel, Engine oil, Lube, Coolant, Air lines, Off road brake, Transmission, Clutch., Gauge, N2O, Power steering, Hydraulic, Air condition
€42.82

AN20 PTFE Steel reinforced hose - Black Oxidized

T1-2-AN20-Black
E85, Methanol, Fuel, Engine oil, Lube, Coolant, Air lines, Off road brake, Transmission, Clutch., Gauge, N2O, Power steering, Hydraulic, Air condition
€43.89

AN8 - 5/16 "Hard tube (8mm)

1.00206.04023
€8.03

Autogauge Fuel Pressure Gauge

1.00141.01-AGAEFP270(BAR)
Autogauge fuel gauge in black with dark silver edge and stepper motor technology. Cheap fuel pressure measures in high quality from Autogauge.
€74.39

Gasoline filter - High flow - Length 109mm. - Blue

1.00235.12041
60 Micron - AN8 (3/4"-16)
€38.80

Fuel filter - High performance

High Performance gasoline filter of the highest quality.
From €37.46

Petrol filter - Performance - AN & hose connection

Here you get small but really fine gasoline filters with high flow
From €40.14

Petrol Pump / Filter Kit (AN-10)

Universal gasoline pump kit that supplies enough gasoline for 600 horsepower. Upgrade your petrol system with this 600 hp. kit.
€295.96

Petrol Pump / Filter Kit (AN-8)

Universal gasoline pump kit that supplies enough gasoline for 600 horsepower. Upgrade your petrol system with this 600 hp. kit.
€320.37 €287.67

Gas Pressure Sensor - Autogauge

1.00222.09051
0-10 bar (10-180 Ohm)
€24.08

Petrol pressure gauge / hands - DeatschWerks

1.00234.02045
Petrol pressure gauge for DeatschWerk's petrol pressure regulator
€37.46

Bracket silver 59.2/51.6 mm

1.00113.09031
Silver bracket for fuel pump or fuel filter. Supplied with rubber inserts and fits components with a diameter of 59.2 or 51.6 millimetres.
€26.76

BMW E30 M20 fuel rail silver

1.00120.03-PQY5470SL
Silver BMW E30 M20 fuel rail with AN6 connection for upgrading the fuel system. Suitable for larger injectors, turbo, E85, tuning and motorsport.
€80.28 €58.34

Bosch BR540 Pre-Filter

1.00231.03051
€18.20

Bosch injector 1300cc

1.00202.02011
Bosch 1300cc injector for tuning, turbo engines and motorsport. E85 and M100 compatible injector rated for up to approximately 170 horsepower per cylinder on petrol and approximately 148 horsepower per cylinder on E85.
€66.90

Bosch injector 1500cc

1.00214.08021
Bosch 1500cc injector for tuning, turbo engines and motorsport. Rated for up to approximately 197 horsepower per cylinder on petrol and approximately 171 horsepower per cylinder on E85.
€93.12

Bosch injector 1700cc NGI2

1.00214.08041
Bosch 1700cc NGI2 injector for tuning, turbo engines and motorsport. Natural gas and petrol compatible injector rated for up to approximately 224 horsepower per cylinder on petrol and approximately 6 kilograms of methane per hour on natural gas.
€73.86

Bosch injector 273cc

0280155931
Bosch 273cc injector for tuning, turbo engines and motorsport. E85-compatible injector rated for up to approximately 34 horsepower per cylinder on petrol and approximately 29 horsepower per cylinder on E85.
€53.41

Bosch injector 280cc

0280155832
Bosch 273cc injector for tuning, turbo engines and motorsport. E85-compatible injector rated for up to approximately 37 horsepower per cylinder on petrol and approximately 32 horsepower per cylinder on E85.
€46.83

Bronze Filter - Petrol filter

For changing filters in magnetic and non-magnetic filters. 30 or 150 microns
From €4.82

Fuel tank float 240/33 ohm - Autogauge

1.00166.05-#94
Swimmer to the fuel tank from Autogauge
€29.44

DCOE/IDF fuel rail for throttle body dual kit

1.00165.02-DUAL
DCOE/IDF fuel rail for throttle body dual kit for EFI builds, tuning and motorsport. Fits DCOE and IDF throttle bodies and can be used when converting from Weber carburettor to electronic injection.
€37.46

DeatschWerks DW350iL - 9-350

1.00146.05-9-350
Electric external fuel pump
€213.54

DeatschWerks DW350iL - 9-350 - BRACKET ONLY

1.00232.11011
Bracket for DeatschWerks DW350iL
€13.38

DeatschWerks DWR1000 Fuel Regulator

Can be adjusted from 2 bar to 6.9 bar
From €200.70

Drag racing Fuel cell - 30 liters

1.00602.0101-TA25GS (Silver)
Fuel cell for tuning, drifting, 402m. drag race, motorsport, rally, etc.
€173.94

Drag racing Fuel cell - 40 liters - Silver - Without fuel meter - Billet fuel cap

1.00604.0101-MP-FCA10G
There are threads in the tank - AN10 (UNF 7/8 "-14) - Then you can mount the nipples that fit the size fitting you want to run with. There are 2 AN10 nipples and 2 plugs included.
€214.08 €187.32

Injector top adapter 34 to 48 mm with 11 mm O-ring

34.48.11 V2
Injector top adapter for extending 34 millimeter fuel injectors so they fit 48 millimeter fuel rail or manifold setups. Suitable for Injector Dynamics and other compatible injectors with correct top geometry and 11 millimeter O-ring.
€21.41

Injector top adapter 34 to 48 mm with 14 mm O-ring

34.48.14 V2
Injector top adapter for extending 34 millimeter fuel injectors so they fit 48 millimeter fuel rail or manifold setups. Suitable for Injector Dynamics and other compatible injectors with correct top geometry and 14 millimeter O-ring.
€21.41

Injector top adapter 34 to 60 mm with 11 mm O-ring

34.60.11 V2
Blue injector top adapter for extending 34 millimeter fuel injectors so they fit 60 millimeter fuel rail or manifold setups. Suitable for Injector Dynamics and other compatible injectors with correct top geometry and 11 millimeter O-ring.
€21.41

Dyseadapter topp 34 til 60 mm med 14 mm O-ring

34.60.14 V2
Purple injector top adapter for extending 34 millimeter fuel injectors so they fit 60 millimeter fuel rail or manifold setups. Suitable for Injector Dynamics and other compatible injectors with correct top geometry and 14 millimeter O-ring.
€21.41

Injector top adapter 48 to 60 mm with 11 mm O-ring

48.60.11 V2
Blue injector top adapter for extending 48 millimeter fuel injectors so they fit 60 millimeter fuel rail or manifold setups. Suitable for Injector Dynamics and other compatible injectors with correct top geometry and 11 millimeter O-ring.
€21.41

Injector top adapter 48 to 60 mm with 14 mm O-ring

48.60.14 V2
Purple injector top adapter for extending 48 millimeter fuel injectors so they fit 60 millimeter fuel rail or manifold setups. Suitable for Injector Dynamics and other compatible injectors with correct top geometry and 14 millimeter O-ring.
€21.41

O-ring for Toyota 16mm. connection

1.00206.07022
O-ring with 16.4 mm. connector that fits your Toyota
€44.96

FAST Precision-Flow Fuel Injectors 30397-8

1.00112.01-30397-8
Fuel Injectors, 39 lbs./hr., High Impedance, 12 V, Saturated Circuit, Universal, LS3, LS7, Set of 8
€470.97

Filter for scroll. Walbro petrol pump - 22mm. connection

1.00232.12023
Filter connection is 22mm. Dimensions 102x42mm.
€24.08

Flex fuel hose 450x10 mm

1.00233.02021
PTFE flex fuel hose 450 x 10 millimetres for fuel systems, E85, methanol and motorsport. Flexible hose without outer braid with high chemical and temperature resistance.
€21.41

FPR100x AN-10 - Nuke Performance

1.00145.03-30002202
100% safe for alcoholic fuels such as E85. - Fully adjustable from 30 to 100 psi.
€353.90

Fuel cap - Alu - Round with vent screw

1.00143.02-MP-TA25AP
Universal filling spigot in aluminum. Bolts and gasket are included for mounting.
€45.49

Fuel cell fittings

With gaskets
From €6.69

Fuel cell foam for fuel tank 370x90x95 mm

1.00347.06-GBVP-0302-09-A
Fuel cell foam for fuel tank in 370 x 90 x 95 millimetres. Tank foam for regular petrol and diesel that reduces sloshing and fuel movement in the tank.
€24.08

Fuel cell foam for fuel tank 385x90x95 mm – with corner cut

1.00347.06-GBVP-0302-09-B
Fuel cell foam for fuel tank in 385 x 90 x 95 millimetres with corner cut. Tank foam for regular petrol and diesel that reduces sloshing and fuel movement in the tank.
€21.41

Fuel cell foam for fuel tank 460x90x95 mm

1.00127.00-385(GBVP0303-09-B)
Fuel cell foam for fuel tank in 460 x 90 x 95 millimetres with centre cut. Tank foam for regular petrol and diesel that reduces sloshing and fuel movement in the tank.
€24.08

Fuel Cell Vent Kit - AN6

1.00120.06-150-22-206
€99.01

Fuel Filler Hose Kit, 90cm (3 feet)

150-31-201
€140.49

Fuel Filter Slim 10 micron AN10 - Cellulose element - Nuke performance

1.00146.05-200-02-201
Fittings not included - Not for E85
€200.16

Fuel Filter Slim 100 micron AN10- Nuke performance

1.00151.0304-20002202
Fittings not included
€86.97

Fuel injector O-ring adapters 14 to 16 mm

1.00204.03016
Set of 2 CNC-machined O-ring adapters for fuel injectors, allowing 14 mm injectors to be fitted in 16 mm fuel rail or weld-in solutions. Used in tuning and motorsport for correct fitment and sealing.
€8.03
Filters Close