Fuel systems

The fuel system is a crucial part of the car’s overall setup when fuel needs to be delivered safely, consistently and in the correct amount to the engine. In tuning, motorsport and conversions, the original fuel system is often not enough, especially if the car is getting more horsepower, a larger turbo, different engine management or is going to be used under heavier load. That is why many choose to upgrade to a fuel system that better matches the car’s power target and the specific project.

At Qualitec, you will find an exciting range of parts for fuel systems for street cars, race cars, drift cars and more serious motorsport projects. A well-functioning fuel system is important because it helps ensure the correct fuel supply to the engine, even when load increases. This provides a better foundation for stable engine operation, more precise tuning and greater safety in a performance setup where lack of fuel can cause major problems.

In this category, you will find fuel pumps, fuel pressure regulators, catch tanks, fuel rails, fuel hoses, AN fittings, filters, adapters and other accessories for building or upgrading fuel systems. Whether you are working with an in-tank or external fuel pump, an EFI setup, motorsport or a custom-built solution, it is important to choose components that match correctly.

An upgraded fuel system is often used when the original solution can no longer keep up. This may be with higher power output, larger injectors, an ethanol or E85 setup, motorsport use or projects where better control of fuel pressure and a more reliable fuel supply are required. With the right components, it becomes easier to build a fuel system that matches both the engine, the application and future upgrades.

It is important to know the target for how much power you want the system to be able to support with stable and sufficient fuel delivery. It is also important to consider whether you will be driving fast through corners, where the fuel can be forced to one side of the fuel tank and cannot be picked up properly. If you are going to use the car for motorsport, we therefore recommend installing a surge tank.

Sort by

Fuel cell foam for fuel tank 500x90x95 mm – with corner cut

1.00347.01-GBVP-0304-09-B
Fuel cell foam for fuel tank in 500 x 90 x 95 millimetres with corner cut. Tank foam for regular petrol and diesel that reduces sloshing and fuel movement in the tank.
€29,44

Check valve for Bosch 044 - AN8 - M12x1.5

1.00207.07051
AN8 Kontraventil bil Bosch 044 benzinpumpe
€25,42

DeatschWerks - DW65v - AWD

1.00112.04-9-655-1025
VW / Audi applications such as 1.8t, 2.0 TSI and 2.0 TFSI
€230,13

EV6 to EV1 PNP injector adapter with cable

1.00212.04011
EV6 to EV1 PNP injector adapter with cable for fitting EV1 injectors to cars with EV6/USCAR injector connectors. Plug and play adapter without modifying the original wiring harness.
€4,01

Gasoline filter - High flow - Length 70mm. - Black

1.00235.12051
60 Micron - AN8 (3/4"-16)
€37,46

GSS340 - 340LPH - 825hp.

1.00323.04-FPP01B
For new fuel with ethanol do not use hose included in the kit. See the related product.
€58,87

Roll over valve AN10 - Black

1.00210.04023
Mounted vertically inside the tank.
€15,52

Bosch injector 1200cc

1.00206.02051
Bosch 1200cc injector with 12 ohm resistance for tuning, turbo engines and motorsport. E85 and M100 compatible injector rated for up to approximately 157 horsepower per cylinder on petrol and approximately 137 horsepower per cylinder on E85.
€63,55

Qualitec - Fuel Regulator - 2 pcs. AN6 nipples + 1 plug

1.00120.04-KIT 2
2 pcs. AN6 Male - AN6 O-ring - nipples + 1 plug - E85 & Alcohol compatible
From €77,60

Siemens Deka 875cc injector

1.00202.11051
Siemens Deka 875cc injector for tuning, turbo engines and motorsport. High impedance EV1 injector with stable fuel delivery, flow match as an option and calculated output up to approximately 115 horsepower per cylinder on petrol and 99 horsepower per cylinder on E85.
€74,93 €66,90

155 LPH 044 Fuel pump 320hk.

1.00136.04-MP-FPP04L
Inlet M18x1,5. Outlet: M12x1,5.
€42,28

Fuel cell foam for fuel tank 450x90x95 mm

1.00347.01-GBVP-0303-09-A
Fuel cell foam for fuel tank in 450 x 90 x 95 millimetres. Tank foam for regular petrol and diesel that reduces sloshing and fuel movement in the tank.
€29,97

Drag racing Fuel cell - 10 liters - Black

1.00304.00-TA25CS-BK
Fuel cell for tuning, drifting, 402m. drag race, motorsport, rally, etc.
€133,80

Gasoline pressure watch / shows - Nuke performance

1.00232.12041
Petrol pressure watch for Nuke Performance gas pressure regulator
€62,22

Bosch injector 870cc

1.00127.05-0280158209
Bosch 870cc injector for tuning, turbo engines and motorsport. E85 and M100 compatible EV1 injector rated for up to approximately 115 horsepower per cylinder on petrol and approximately 99 horsepower per cylinder on E85.
€62,08 €58,87

Flex fuel hose PTFE 300x8 mm

1.00324.04-8x300
PTFE flex fuel hose 300 x 8 millimetres for fuel systems, E85, methanol and motorsport. Flexible hose without outer braid with high chemical and temperature resistance.
€10,70

Walbro 255lph High Pressure Fuel Pump - GSS341

1.00205.06021
This fuel pump delivers up to 255 liters per hour. Can be used by petrol cars. 500hp +
€106,50

Fuel cell foam for fuel tank 500x90x95 mm

1.00347.06-GBVP-00304-09-A
Fuel cell foam for fuel tank in 500 x 90 x 95 millimetres. Tank foam for regular petrol and diesel that reduces sloshing and fuel movement in the tank.
€33,45

Fuel sampling kit for 8 mm hose

1.00212.11032
Fuel sampling kit for 8 millimetre hose. Used for easy and quick fuel sampling in motorsport, racing, rally and trackday.
€52,18

Bosch injector 2200cc NGI2

1.00214.08051
Bosch 2200cc NGI2 injector for tuning, turbo engines and motorsport. Natural gas and petrol compatible injector rated for up to approximately 290 horsepower per cylinder on petrol and approximately 7.7 kilograms of methane per hour on natural gas.
From €70,91

Walbro HELLCAT 525LPH fuel pump

1.00141.02-90000285
This fuel pump delivers up to 525 liters per hour. Can be used by petrol cars with internal combustion engine (E85). 900Hk +
€197,49

Fuel cap - Alu - Round with vent screw

1.00132.02-GBVP00301
Universal filling spigot in aluminum. Bolts and gasket are included for mounting.
€45,49

10 Micron Filter Element - Cellulose - Nuke Performance

1.00220.05044
Replacement 10 micron Fuel Filter insert for Nuke Performance fuel filters.
€66,36

Remote Oil & Fuel pressure hose

1/8"-27 NPT connection - Made to desired length
€52,98

AN3 PTFE Nylon Reinforced Hose - Black

1.00154.03021
E85, Methanol, Fuel, Engine oil, Lube, Coolant, Air lines, Off road brake, Transmission, Clutch., Gauge, N2O, Power steering, Hydraulic, Air condition
€9,10

044 bracket with noise reduction

1.00121.01-GBKI00301
Noise-reducing bracket for Bosch 044-type fuel pump. Can also be used for similar external pumps or filters with a suitable diameter of 60 millimetres.
€34,79

Caburator - Fuel pump

1.00121.06-FPP06C
Here is a fuel pump for caburator, suitable for all types of caburator, moped, cars, motorcycles etc.
€80,28 €53,41

Check valve for Bosch 044 - AN6 - M12x1.5

1.00207.04021
AN6 Check valve car Bosch 044 petrol pump.
€25,42

Upgrade O-ring kit for E85 / Methanol

1.00210.07053
Upgrade with this 3 pc. O-ring kit and the fuel filter is 100% ready for Methanol and E85.
€10,60

Drag racing Fuel cell - 60 liter - Rectangle

L31-TA1681-60L
Fuel cell for tuning, drifting, 402m. drag race, motorsport, rally etc. for mounting in trunk
€173,94

Drag racing Fuel cell - 20 liters - Black

1.00343.00-MP-TA25AS-BK
Fuel cell for tuning, drifting, 402m. drag race, motorsport, rally, etc.
€153,87

DeatschWerks DW300c - 9-307-1000

1.00235.11052
Compact fitment fuel pump
€181,43

Fuel cap - Aluminum filler cap

1.00132.01-MP-TA25NEW
Universal filling spigot in aluminum. Bolts included for mounting.
€56,20 €38,80

FUELAB Analog Fuel Pressure Gauge 71501

1.00202.11022
Analog clock from FUELAB
€26,76

Roll over valve AN6 - Black

1.00210.04021
Mounted vertically inside the tank.
€13,38

Denso lower cushion for Injector Dynamics injectors

1.00205.04011
Lower cushion, insulator or spacer for compatible Denso-style fuel injectors. Fits Injector Dynamics and other compatible injectors with a corresponding lower cushion design.
€3,34

Qualitec - Regulator for Curator / Weber - Red / Silver

1.00163.00-GBVP01201
Can regulate between 0.3-1 bar.
€96,34 €80,28

Gasoline filter - High flow - Length 109mm. - Black

1.00141.01-GBKI00202-08
60 Micron - AN8 (3/4"-16)
€38,80

Drag racing Fuel cell - 40 liters - Black

L36-TA25BS-BK
Fuel cell for tuning, drifting, 402m. drag race, motorsport, rally, etc.
€192,14

AN8 - 12mm rør

1.00231.06052
€18,06

Drag racing Fuel cell - 40 liters

L35-TA25BS (Silver)
Fuel cell for tuning, drifting, 402m. drag race, motorsport, rally, etc.
€192,14

Steel Reinforced rubber Hose 28.5mm. / AN20

1.00306.03-Stål slange-AN20
Fuel(Non alcohol), Engine oil, Lube, Coolant and Air lines
€40,14

Check valve AN12 -> AN12 - High flow

1.00201.12033
€29,44

A1000 regulator IN 3/4 "x16 - OUT 9/16" x18 - Black

1.00121.05-GBVP01203
Regulator for 1000 hp. in incredibly delicious quality - E85 & Alcohol compatible
From €85,63

Filter for Walbro GSS341 and GSS342

1.00233.01041
This filter fits on a Walbro fuelpump called GSS341 or Walbro GSS342 - 11mm.
€20,87

Denso to EV1 PNP injector adapter

1.00220.09012
Denso to EV1 PNP injector adapter for fitting EV1 injectors to cars with Denso injector connectors. Plug and play adapter without modifying the original wiring harness.
€5,35

Surge tank without petrol pump - Black

1.00114.07-GBFS01704-Black
Surge tank of 2 liters for tuning, drifting, 402m. drag race etc.
€72,25

Turbosmart FPR Gauge 0-100psi Liquid Fill

1.00234.02044
1/8 NPT port
€34,52

Turbosmart FPR6 Fuel Pressure Regulator (Sleeper)

1.00136.03-TS-0404-1025
1:1 ratio and superior flow and bypass capacity for vehicles with -6 / 6AN fuel systems
€173,40
Filters Close