Fuel systems

The fuel system is a crucial part of the car’s overall setup when fuel needs to be delivered safely, consistently and in the correct amount to the engine. In tuning, motorsport and conversions, the original fuel system is often not enough, especially if the car is getting more horsepower, a larger turbo, different engine management or is going to be used under heavier load. That is why many choose to upgrade to a fuel system that better matches the car’s power target and the specific project.

At Qualitec, you will find an exciting range of parts for fuel systems for street cars, race cars, drift cars and more serious motorsport projects. A well-functioning fuel system is important because it helps ensure the correct fuel supply to the engine, even when load increases. This provides a better foundation for stable engine operation, more precise tuning and greater safety in a performance setup where lack of fuel can cause major problems.

In this category, you will find fuel pumps, fuel pressure regulators, catch tanks, fuel rails, fuel hoses, AN fittings, filters, adapters and other accessories for building or upgrading fuel systems. Whether you are working with an in-tank or external fuel pump, an EFI setup, motorsport or a custom-built solution, it is important to choose components that match correctly.

An upgraded fuel system is often used when the original solution can no longer keep up. This may be with higher power output, larger injectors, an ethanol or E85 setup, motorsport use or projects where better control of fuel pressure and a more reliable fuel supply are required. With the right components, it becomes easier to build a fuel system that matches both the engine, the application and future upgrades.

It is important to know the target for how much power you want the system to be able to support with stable and sufficient fuel delivery. It is also important to consider whether you will be driving fast through corners, where the fuel can be forced to one side of the fuel tank and cannot be picked up properly. If you are going to use the car for motorsport, we therefore recommend installing a surge tank.

Sort by

Turbosmart fuel pressure gauge 0-100 PSI/0-7 bar

1.00234.02044
Turbosmart analogue fuel pressure gauge with 0-100 PSI and 0-7 bar. Liquid-filled gauge with 1/8" NPT thread for fuel pressure regulators and EFI fuel systems.
€34.51

10 micron stainless steel filter element 35 mm

1.00206.09052
10 micron stainless steel filter element for fuel filter. Replacement filter with 43.9 millimetre diameter and 35 millimetre length for fuel system service.
€10.59

Original Bosch 044 petrol pump - 500hp. - 0580464200

1.00123.03-0580464200
Outlet: M10x1 without non-return valve, M12x1.5 with supplied check valve.
€200.65 €163.20

Turbosmart FPR6 EFI fuel pressure regulator 2x AN6 / 1x AN6 black

1.00136.03-TS-0404-1025
Turbosmart FPR6 adjustable EFI fuel pressure regulator with a true 1:1 vacuum/boost reference, adjustable fuel pressure from 35-80 PSI, AN6 connections and high-flow bypass capacity. Suitable for petrol, E85, methanol and motorsport fuels in EFI return-style fuel systems supporting engines up to approximately 1,200 horsepower.
€173.36

Aeromotive Extreme Flow EFI fuel pressure regulator 2x AN10 ORB / 1x AN10 ORB black

1.00158.03-13134
Extreme high-flow EFI fuel pressure regulator with 2 x AN10 ORB inlets, 1 x AN10 ORB return port, adjustable fuel pressure from 30–120 PSI, and a 1:1 vacuum/boost reference. Designed for high-performance EFI fuel systems.
€321.04

AN12 PTFE Nylon Reinforced Hose - Black

1.00161.09011
E85, Methanol, Fuel, Engine oil, Lube, Coolant, Air lines, Off road brake, Transmission, Clutch., Gauge, N2O, Power steering, Hydraulic, Air condition
€26.22

Fuel rail adapter for Mazda, Nissan & Subaru AN6

1.00212.11031
Fuel rail adapter for Mazda, Nissan, and Subaru with an AN6 connection. Installs directly onto the factory fuel rail and allows the use of an external adjustable fuel pressure regulator in EFI fuel systems.
€16.05

AEM X-Series 30-0301 pressure gauge 0-100 PSI/0-7 bar

1.00146.02-30-0301
AEM X-Series 30-0301 digital pressure gauge for oil and fuel pressure. 0-100 PSI or 0-7 bar, 52 millimetre housing, LED display, 0-5V output and AEMnet CAN bus. Faceplates can be purchased separately, so the pressure gauge can be used for both oil and fuel.
€234.09

Fuel tank 40 L black

L36-TA25BS-BK
Practical 40-litre black aluminium fuel tank with integrated sump and AN10 (7/8"-14 UNF) threads. Supplied with an integrated fuel level sender with wiring outlet for a fuel gauge. Compatible with 0-90 Ohm fuel level senders. Ideal as a drag racing fuel cell.
€192.09

10 micron stainless steel filter element 123 mm

1.00233.07021
10 micron stainless steel filter element for fuel filter. Replacement filter with 43.9 millimetre diameter and 123 millimetre length for fuel system service.
€21.30

AEM - 340lph E85 Compatible High Flow In-Tank Fuel Pump without Hooks - 50-1220

1.00129.01-50-1220
Original AEM petrol pump for E85 which can deliver a lot of gasoline.
€170.69

Walbro fuel filter sock 95x80 mm

1.00233.01041
Walbro fuel filter sock for fuel pumps with 11 millimetre pump inlet. Filter sock with 95 x 80 millimetre dimensions, mounted directly on the pump intake to protect against dirt and particles from the tank.
€20.87

Fuel cell foam for methanol & alcohol 203x203x101 mm

1.00146.04-30154
Fuel cell foam for methanol and alcohol-based fuels in 203 x 203 x 101 millimetres. Fuel-resistant tank foam for fuel cells and motorsport fuel tanks that reduces sloshing and fuel movement during hard driving.
From €33.44

Injector Dynamics injectors ID1050X 60 mm set of 6

1.00107.05-1050.60.14.14.6
Injector Dynamics ID1050X 60 millimetre petrol injectors in a set of 6 for tuning, turbo engines and motorsport. High-performance top-feed injectors with USCAR connector and rated output up to circa 138 horsepower per cylinder on petrol and 120 horsepower per cylinder on E85.
€708.97

Fuel surge tank 1.5L AN6/AN8

1.00114.06-GBVP02202-Black
1.5-litre aluminium fuel surge tank for tuning, motorsport and larger fuel systems. With AN6 threads at the top, AN8 threads at the bottom and included AN fittings for both hose and AN connection.
€62.07

Holley Mighty Mite electric fuel pump 32 GPH 4-7 PSI

1.00121.06-12-427
Holley Mighty Mite electric fuel pump for carburettor and low-pressure systems. 12V pump with 4-7 PSI operating pressure, 32 GPH flow and compact self-priming construction.
€84.14

HPFP installation tool for Audi/Volkswagen 1.8/2.0 TFSI/TSI EA888 Gen 3

VS142
HPFP installation tool for safe and precise assembly of the high-pressure fuel pump. Suitable for Audi/VW 1.8/2.0 TFSI/TSI EA888 Gen 3.
€26.75

Fuel surge tank 4L for 2 fuel pumps

1.00317.03-MP-TA87BK
4 litre fuel surge tank for 2 Bosch 044 fuel pumps or similar pumps. Made with a black finish, 3 x AN6 O-ring threaded ports and 200 x 151 x 151 millimetre tank dimensions. Suitable for tuning, motorsport, drift and drag racing.
€72.24

Check valve AN8 -> AN8 - High flow

1.00205.01022
€25.42

Qualitec roll over valve AN10

1.00210.04023
Roll over valve with AN10 connection for fuel tanks and fuel cells. Installs vertically in the tank and provides controlled ventilation during normal operation while improving safety in the event of a rollover.
€15.52

Magnetic gasoline filter - AN6 - Black - 30 Micron

1.00205.09041
€24.08

Steel Reinforced rubber Hose 22.2mm. / AN16

SLR6
Fuel(Non alcohol), Engine oil, Lube, Coolant and Air lines
€27.82

30 micron filter element bronze

1.00210.08031
€4.82

Walbro 255lph High Pressure Fuel Pump - GSS342

1.00220.12011
This fuel pump delivers up to 255 liters per hour. Can be used by petrol cars. 500hp +
€106.48

Walbro 450lph E85 Compatible Universal Fuel Pump & Installation Kit

1.00166.05-TIA485-2
With Installation Kit - This fuel pump delivers up to 450 liters per hour. Can be used by petrol cars with internal combustion engine (E85). 750Hk +
€240.25

AN8 - 3/8 "Hard tube (9.5mm)

1.00206.04022
Fits our flex fuel sensor
€8.03

Nuke Performance remote quick release fuel cap

1.00128.01-150-30-101
Nuke Performance aluminium remote quick lock filler cap for 50 millimetre fuel hose. With 90-degree quick release lock, Viton gasket and safety wire kit. Suitable for petrol, diesel, E85, ethanol, methanol and race fuel.
€280.38

Nuke Performance competition fuel cell unit fuel surge tank 2L

1.00146.09-150-05-201
Nuke Performance CFC Unit with integrated 2.0 litre fuel surge tank for fuel cell. Low profile motorsport solution with space for 1 lift pump and 1–2 internal high-pressure pumps. Fits most 39 millimetre fuel pumps as well as larger pumps such as DeatschWerks DW400, Walbro GST400, GST450, GST520, Bosch BR540 and Aeromotive Stealth 450.
€668.31

Nuke Performance FPR100m EFI fuel pressure regulator 2x AN8 ORB / 1x AN8 ORB

1.00146.03-300-02-203
Nuke Performance FPR100m adjustable EFI fuel pressure regulator with a 30–100 PSI adjustment range, 2 x AN8 ORB inlets, 1 x AN8 ORB return port, and a 1:1 vacuum/boost reference. Suitable for gasoline, E85, ethanol, and methanol in EFI fuel systems up to approximately 1,200 horsepower.
€333.89

Turbosmart FPR6 EFI fuel pressure regulator 2x AN6 / 1x AN6 black/silver

1.00114.05-TS-0404-1022
Turbosmart FPR6 adjustable EFI fuel pressure regulator with a true 1:1 vacuum/boost reference, adjustable fuel pressure from 35-80 PSI, AN6 connections and high-flow bypass capacity. Suitable for petrol, E85, methanol and motorsport fuels in EFI return-style fuel systems supporting engines up to approximately 1,200 horsepower.
€168.55

Bracket 50 mm

1.00204.02042
Black bracket for fuel pump or fuel filter. Fits components with a diameter of 50 millimetres.
€16.99

Bracket 55 mm

1.00204.02043
Black bracket for fuel pump or fuel filter. Fits components with a diameter of 55 millimetres.
€17.02

Autotech HPFP upgrade for Audi/Volkswagen 2.0 FSI EA113

1.00145.01-10.127.100K
Autotech HPFP upgrade for VW/Audi EA113 2.0T FSI and selected Mazdaspeed models. High-pressure fuel pump kit with 9.8 mm piston and DLC coating, capable of delivering up to 50% higher flow for tuning, performance and motorsport.
€425.38

Pro fuel filter with ball valve - AN12

1.00113.09-GBKI00209-12
Petrol filter that can be used for fuels such as gasoline, methanol and diesel. Outer diameter of 50.4mm - 60micron filter
€49.49

DCOE/IDF fuel rail for throttle body

1.00205.11025
DCOE/IDF fuel rail for throttle body for EFI builds, tuning and motorsport. Fits DCOE and IDF throttle bodies and can be used when converting from Weber carburettor to electronic injection.
€33.44 €24.08

DeatschWerks - DW65v - FWD

1.00112.02- 9-654-1025
VW / Audi applications such as 1.8t, 2.0 TSI and 2.0 TFSI
€230.08

DeatschWerks DW400 - 9-401-1001

1.00145.05-9-401-1001
Internal fuel pump with universal kit for setup
€227.41

Fuel tank 20 L silver

L3-TA25AS
Compact 20-litre silver aluminium fuel tank with an integrated sump and AN10 (7/8"-14 UNF) threads. Compatible with 0-90 Ohm fuel level senders. Ideal as a drag racing fuel cell.
€153.83

AEM 400lph Inline High Flow Fuel Pump. 400lph @ 40psi - 50-1009

1.00128.04-50-1009
High Flow Fuel Pump. 400lph @ 40psi, 270LPH @ 120psi.
€206.67

Fuel tank 30 L elongated silver

L602H-TA1681-30L
Practical elongated 30-litre silver aluminium fuel tank with integrated sump and AN10 (7/8"-14 UNF) threads. Supplied with an integrated fuel level sender with wiring outlet for a fuel gauge. Compatible with 0-90 Ohm fuel level senders. Ideal as a drag racing fuel cell.
€213.49

Qualitec carburettor fuel pressure regulator 2x AN6 / 1x AN6 black

1.00120.01-GBVP01201-Black-Logo
Qualitec adjustable carburetor fuel pressure regulator with a 5–12 PSI adjustment range, 2 x AN6 ORB inlets, and 1 x AN6 ORB return port. Compatible with gasoline, E85, and alcohol-based fuels.
€96.31 €86.95

Flex fuel hose PTFE 450x8 mm

1.00323.02-8x450
PTFE flex fuel hose 450 x 8 millimetres for fuel systems, E85, methanol and motorsport. Flexible hose without outer braid with high chemical and temperature resistance.
€10.70

Nuke Performance fuel filter AN10 10 micron cellulose

1.00159.07-200-01-201
Nuke Performance fuel filter AN10 high-flow inline filter with 10 micron cellulose element. Suitable as a fine filter after the fuel pump for petrol and diesel.
€200.12

Nuke Performance 10 micron stainless steel filter insert

1.00221.10042
Nuke Performance 10 micron filter insert in welded stainless steel. Suitable for petrol, diesel, E85 and methanol, and supplied with 2 Viton O-rings.
€106.48

Nuke Performance 10 micron stainless steel filter insert PF200

1.00234.04013-200-10-104
Nuke Performance 10 micron filter insert in welded stainless steel for PF200 fuel filters. E85-compatible filter insert with 200 millimetre filter element, high flow capacity and 2 Viton O-rings included.
€117.58

Autotech HPFP upgrade for Audi/Volkswagen 1.8/2.0 TFSI/TSI EA888 Gen 3

1.00166.03-10.127.203K
Autotech HPFP upgrade for Audi and VW EA888 Gen 3 1.8/2.0 TFSI/TSI. High-pressure fuel pump kit with 17.67 mm piston and DLC coating for tuning, performance and motorsport.
€401.31

Gasoline filter - High flow - Length 158mm. - Blue

1.00235.12031
60 Micron - AN8 (3/4"-16)
€42.14

Fuel level sender 250 mm 0-90 Ohm

1.00121.06-GBVP00301-02
Universal adjustable fuel level sender for 250 mm fuel tanks with a 0-90 Ohm signal.
€64.21 €56.18
Filters Close